Doç. Dr. ERKAN BAHÇE

Yayın Ağı

Makaleler 69

1. Effect of relative density and strut thickness on dimensional accuracy in lattice structures produced by additive manufacturing

Uzunyol Ö. F., Akbay Ö. C., BAHÇE E.

Journal of Cellular Plastics , cilt.62, sa.4, ss.249-263, 2026 (SCI-Expanded, Scopus)

2. Estimation of Forces in Longitudinal and Multi-Pass Milling of GFRP and ABACA Composites Utilizing Machine LearningTechniques

Özdemir B., Emir E., BAHÇE E., Yardımeden A., Kılıçkap E.

Journal of Intelligent and Fuzzy Systems , cilt.50, sa.7, ss.2125-2135, 2026 (SCI-Expanded, Scopus)

3. Additive manufacturing of bioinspired cylindrical polar lattice structures: generative design and parametric algorithm

Oymak M. A., BAHÇE E., Singh G.

Progress in Additive Manufacturing , cilt.11, sa.6, ss.5955-5971, 2026 (ESCI, Scopus)

4. 3D printed biocompatible functionally graded cellulose-reinforced polymer scaffolds with varying unit cell architectures: evaluation of L-929 cell proliferation and morphology

Akbay Ö. C., BAHÇE E., GÜRSES C., KÖYTEPE S.

Journal of Polymer Research , cilt.33, sa.4, 2026 (SCI-Expanded, Scopus)

5. Weibull-Based Reliability of Full-Arch Zirconia Prostheses in a Mandibular All-on-4 Model: Monolithic Versus Titanium-Bar-Supported Designs

TUZLALI M., BAKİ N., Yildirim Avcu G., BAHÇE E.

Applied Sciences (Switzerland) , cilt.16, sa.5, 2026 (SCI-Expanded, Scopus)

6. Mechanostat-Informed Strain Mapping of Osseodensification-Inspired Peri-Implant Densification Versus Conventional Drilling in Osteoporotic-like Low-Density Cancellous Bone: A 3D Static Linear Finite Element Analysis

TUZLALI M., BAKİ N., ÖNÜGÖREN N. İ., ARAL K., BAHÇE E., ARAL C. A.

Journal of Functional Biomaterials , cilt.17, sa.3, 2026 (SCI-Expanded, Scopus)

7. An ANFIS model for predicting workpiece deformation during the milling of thin-walled composite components

Özdemir B., Emir E., BAHÇE E., Yardımeden A., Kılıçkap E.

Journal of Elastomers and Plastics , cilt.58, sa.1, ss.26-45, 2026 (SCI-Expanded, Scopus)

8. Patient-Specific Lattice Cage Design for Cervical Spinal Fusion

Bozyigit B., Oymak M. A., BAHÇE E., Singh G.

Turkish Neurosurgery , cilt.36, sa.1, ss.74-81, 2026 (SCI-Expanded, Scopus, TRDizin)

9. Investigation of the Effect of Unit Cell Type on the Mechanical Properties of Lattice Structures by Dynamic Point Tracking

Akbay Ö. C., BAHÇE E.

Journal of Materials Engineering and Performance , 2026 (SCI-Expanded, Scopus)

10. Detection of periapical lesions in teeth with fixed prostheses using segmentation models and analyzing crown-lesion relationships.

Gul B., Cebi C., Malkoç E., Altinsoy B., Bahçe E., Karabaş A.

The Journal of prosthetic dentistry , 2025 (SCI-Expanded, Scopus)

11. Examining the impact of fiber orientation angle and drilling parameters on the quality of holes in GFRP pipes

Ozdemir B., Emir E., BAHÇE E., Yardimeden A., Kilickap E.

Journal of Elastomers and Plastics , cilt.57, sa.8, ss.1447-1463, 2025 (SCI-Expanded, Scopus)

12. Evaluating the performance of AI chatbots in responding to dental implant FAQs: A comparative study

TUZLALI M., BAKİ N., ARAL K., ARAL C. A., BAHÇE E.

BMC Oral Health , cilt.25, sa.1, 2025 (SCI-Expanded, Scopus)

13. New type of infrastucture in fixed prostheses: lattice framework

Tatar N., BAHÇE E.

Progress in Additive Manufacturing , cilt.10, sa.10, ss.7437-7448, 2025 (ESCI, Scopus)

14. Compressive behavior of functional graded hybrid lattice structure

Emir E., BAHÇE E.

International Journal of Advanced Manufacturing Technology , cilt.138, sa.3, ss.1605-1620, 2025 (SCI-Expanded, Scopus)

15. Investigation of mechanical performance of hybrid design porous structures manufactured from CoCr Alloy

AKBAY Ö. C., BAHÇE E.

Progress in Additive Manufacturing , cilt.10, ss.3695-3710, 2025 (ESCI, Scopus)

16. Bio-Inspired Graded and Uniform Cylindrical Lattices Fabricated by Material Extrusion 3D Printing: An Experimental and Numerical Investigation

Oymak M. A., BAHÇE E., Singh G.

Journal of Applied Polymer Science , cilt.142, sa.10, 2025 (SCI-Expanded, Scopus)

17. Karbon fiber kaplamalı tpms kafes yapılarının basma testi analizi

AKBAY Ö. C., ÖZDEMİR B., BAHÇE E., oymak m. a.

Dicle Üniversitesi Mühendislik Fakültesi Mühendislik Dergisi , cilt.16, 2025 (TRDizin)

18. KAFES YAPILI FEMUR PLAKLARIN STRES KALKANI ÜZERİNDEKİ ETKİSİNİN SONLU ELEMANLAR İLE İNCELENMESİ

uzunyol ö. f., BAHÇE E.

Dicle Üniversitesi Mühendislik Fakültesi Mühendislik Dergisi , cilt.16, 2025 (TRDizin)

19. Machining and Sustainability Performance Comparison for the Milling Process of Al6082 Alloy Under Various Minimum Quantity Lubrication Conditions

YAPAN Y. F., Türkeli K., Emiroğlu U., BAHÇE E., UYSAL A.

International Journal of Precision Engineering and Manufacturing - Green Technology , cilt.12, sa.2, ss.409-430, 2025 (SCI-Expanded, Scopus)

20. Mechanical analysis of 3D printed dental restorations manufactured using different resins and validation with FEM analysis.

Gul B., Demirci F., Baki N., Bahce E., Özcan M.

BMC oral health , cilt.25, sa.1, ss.131, 2025 (SCI-Expanded, Scopus)

21. Production of natural source nanocrystalline cellulose and performance comparison with industrial cellulose

Akbay Ö. C., BAHÇE E., KÖYTEPE S., KANMAZ H., HAYALOĞLU A. A.

Proceedings of the Institution of Mechanical Engineers, Part N: Journal of Nanomaterials, Nanoengineering and Nanosystems , 2025 (ESCI, Scopus)

22. Fabrication and machining of aluminum-reinforced graphite metal matrix composites

Olmez C., BAHÇE E., KÖYTEPE S., ÇAKIR M. C., Kurt O.

Fullerenes Nanotubes and Carbon Nanostructures , cilt.33, sa.6, ss.581-596, 2025 (SCI-Expanded, Scopus)

23. Experimental and numerical study on micro-milling of CoCrW alloy produced by selective laser melting and casting

Oymak M. A., BAHÇE E., GEZER İ.

Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture , cilt.238, sa.13, ss.1924-1939, 2024 (SCI-Expanded, Scopus)

24. Farklı Kafes Yapılarına Sahip PLA Numunelerin Delinmesinde Delaminasyonun İncelenmesi

EMİR E., ÖZDEMİR B., BAHÇE E., ERENER G.

Yüzüncü Yıl Üniversitesi Fen Bilimleri Enstitüsü Dergisi , cilt.29, sa.2, ss.708-719, 2024 (TRDizin)

25. Monitoring chip color change in Ti6Al4V alloy milling and investigating the effects of cooling/lubrication on chip morphology

Özdemir B., BAHÇE E., Aksungur S., ÇAKIR M. C.

Journal of Manufacturing Processes , cilt.124, ss.1092-1101, 2024 (SCI-Expanded, Scopus)

26. Experimental investigation and FEM analysis of chip morphology in the turning of ASTM F-75 CoCrMo alloy

EMİR E., ÖZDEMİR B., BAHÇE E.

SIGMA JOURNAL OF ENGINEERING AND NATURAL SCIENCES , cilt.42, ss.679-691, 2024 (ESCI, Scopus)

27. CASE STUDY OF A DISTAL FEMUR TI6Al4V LOCKED COMPRESSION PLATE FAILURE SURFACE INVESTIGATION AND FINITE ELEMENT ANALYSIS

Can M., Oymak M. A., Koluaçik S., BAHÇE E., Uzunyol Ö. F.

Journal of Mechanics in Medicine and Biology , cilt.24, sa.4, 2024 (SCI-Expanded, Scopus)

28. Mechanical characterization of lattice structure produced by additive manufacturing under torsion and compression

Akbay Ö. C., Özdemir B., BAHÇE E., Emir E., USLU UYSAL M.

Journal of Cellular Plastics , cilt.60, sa.1, ss.3-22, 2024 (SCI-Expanded, Scopus)

29. WEAR AND ADHESION PROPERTIES OF MULTILAYER Ti/TiN ,(TiC)/TiCN/TaN THIN FILMS DEPOSITED ON Ti13Nb13Zr ALLOY BY CLOSE FIELD UNBALANCED MAGNETRON SPUTTERING

ASLAN A. K., BAHÇE E.

ACTA METALLURGICA SLOVACA , cilt.29, 2023 (ESCI, Scopus)

30. Preparation and Characterization of Nano TiO2–Hydroquinone-Doped Al Composites and Investigation of Theirs Wear Properties

EMRE F. B., KÖYTEPE S., BAHÇE E.

Protection of Metals and Physical Chemistry of Surfaces , cilt.59, sa.5, ss.911-921, 2023 (SCI-Expanded, Scopus)

31. Sıcak Pres CETP Kompozit Panellerin Eğilme Performansları Üzerine Deneysel ve Teorik Çalışmalar

BAHÇE E., ÖZDEMİR B., ÖNAL T.

Black Sea Journal of Engineering and Science , cilt.6, sa.3, ss.229-234, 2023 (TRDizin)

32. Alüminyum Frezelemede İlerleme Hızının Titreşime Etkisinin İncelenmesi

ÖZDEMİR B., Bahçe E., Güler M. S.

Karadeniz Fen Bilimleri Dergisi , cilt.13, sa.2, ss.483-492, 2023 (TRDizin)

33. CAM ELYAF TAKVİYELİ POLİMER KOMPOZİTLERİN DELMESİNDE TAKIM ÇAPININ İTME KUVVETİ VE TİTREŞİM ÜZERİNDEKİ ETKİSİNİN ARAŞTIRILMASI

ÖZDEMİR B., BAHÇE E., GÜLER M.

Black Sea Journal of Engineering and Science , cilt.6, sa.2, ss.68-73, 2023 (TRDizin)

34. Deformation Behaviors Investigation of CoCr Alloy Lattice Structures under Compression Test

AKBAY Ö. C., ÖZDEMİR B., BAHÇE E., EMİR E.

Society for Manufacturing Engineers , cilt.18, sa.1, 2023 (Hakemli Dergi)

35. Analysis of Drilling Behaviour in Jute Fibres Reinforced Natural Composites

Özdemir B., Yardimeden A., BAHÇE E., Kilickap E., Emir E.

Journal of Natural Fibers , cilt.20, sa.1, 2023 (SCI-Expanded, Scopus)

36. The effects of HAp coating layer on mechanical and optical properties at bonding interface of high-performance polymers.

Demirci F., Bahce E.

Journal of the mechanical behavior of biomedical materials , cilt.137, ss.105539, 2022 (SCI-Expanded, Scopus)

37. Prediction of tool deflection using image processing in ball-end milling

Ozdemir B., BAHÇE E.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE , 2022 (SCI-Expanded, Scopus)

38. Mechanical analysis of three-unit metal-free fixed dental prostheses produced in different materials with CAD/CAM technology

DEMİRCİ F., BAHÇE E., BARAN M. Ç.

CLINICAL ORAL INVESTIGATIONS , cilt.26, sa.9, ss.5969-5978, 2022 (SCI-Expanded, Scopus)

39. Dimensional Accuracy of Porous Structures Manufactured Using Air Controller

EMİR E., BAHÇE E., UYSAL A., Dzhemilov E.

LECTURE NOTES IN MECHANICAL ENGINEERING , ss.90-97, 2022 (Scopus)

40. Production and Cleaning of Lattice Structures Used in the Space and Aerospace Industry with Metal Additive Manufacturing Method

Akbay O. C., BAHÇE E., UYSAL A., GEZER İ.

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE , cilt.31, sa.8, ss.6310-6321, 2022 (SCI-Expanded, Scopus)

41. Investigation of Mechanical Behavior of Scaffolding Structures Produced Using CoCr Alloy by Selective Laser Melting Method

AKBAY Ö. C., BAHÇE E., ÖLMEZ C.

Iktisadi Kalkinma ve Sosyal Arastirmalar Dernegi , cilt.6, 2022 (Hakemli Dergi)

42. The Effects of the Production Direction on the Part in Additive Manufacturing

BAHÇE E., boyacı s., GÜLER M. S.

Karadeniz Fen Bilimleri Dergisi , cilt.12, 2022 (TRDizin)

43. Eklemeli İmalat ve Geleneksel İmalat Yöntemi ile Üretilen CoCr Alaşımı Yüzeylerde Hidroksiapatit (HAp) Kaplamanın Karşılaştırılması

erener g., GEZER İ., BAHÇE E.

Yüzüncü Yıl Üniversitesi Fen Bilimleri Enstitüsü Dergisi , cilt.27, ss.39-49, 2022 (TRDizin)

44. Investigation of thermal damage in bone drilling: Hybrid processing method and pathological evaluation of existing methods

Can M., Koluacik S., BAHÇE E., GÖKÇE H., TECELLİOĞLU F. S.

JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS , cilt.126, 2022 (SCI-Expanded, Scopus)

45. Evaluation of the accuracy of dental casts manufactured with 3D printing technique in the All-on-4 treatment concept

Tas H., Demirci F., Tuzlali M., Bahce E., Yildirim Avcu G.

Journal of Advanced Prosthodontics , cilt.14, sa.6, ss.379-387, 2022 (SCI-Expanded, Scopus)

46. ÜPMY tabanlı kafes yapılarının SLE yöntemi ile üretiminde boyut hassasiyetinin incelenmesi

BAHÇE E., EMİR E., GÜLER M. S.

ENGINEERING SCIENCES , cilt.11, ss.372-378, 2022 (TRDizin)

47. An investigation of the effects of cryogen application direction on Ti6Al4V alloy milling

BAHÇE E., Sarıgül E.

Journal of Advances in Manufacturing Engineering , cilt.2, sa.2, ss.42-48, 2021 (Hakemli Dergi)

48. Effect of Octet-Truss Lattice Transition Geometries on Mechanical Properties

Emir E., BAHÇE E., UYSAL A.

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE , cilt.30, sa.12, ss.9370-9376, 2021 (SCI-Expanded, Scopus)

49. Investigation of the Lattice Production of Removable Dental Prostheses with CoCr Alloy Using Additive Manufacturing

TATAR N., Tuzlah M., BAHÇE E.

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE , cilt.30, sa.9, ss.6722-6731, 2021 (SCI-Expanded, Scopus)

50. Burr Measurement Method Based on Burr Surface Area

BAHÇE E., Ozdemir B.

INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING-GREEN TECHNOLOGY , cilt.8, sa.4, ss.1287-1296, 2021 (SCI-Expanded, Scopus)

51. Wear and validation of posterior stabilized knee prosthesis with the knee simulator

BAHÇE E., Emir E.

MATERIALS TECHNOLOGY , cilt.36, sa.6, ss.356-363, 2021 (SCI-Expanded, Scopus)

52. Investigating MoP bearing wear behavior in a hip simulator with muscular properties

BAHÇE E., KARAMAN D.

EMERGING MATERIALS RESEARCH , cilt.10, sa.1, ss.7-17, 2021 (SCI-Expanded, Scopus)

53. Investigation Of Cryogenic Cooling Effect With Finite Element Method In Micro Milling Of Ti6al4v Material

OYMAK A., BAHÇE E., GEZER İ.

International Journal of Innovative Engineering Applications , cilt.5, sa.2, ss.93-100, 2021 (TRDizin)

54. Electrochemical Corrosion and Metal Ion Release Protective Efficiency of the Multilayer TaN Coatings on CoCrMo Biomedical Alloy

ASLAN A. K., BAHÇE E., GÜLER M. S.

MATERIALS SCIENCE-MEDZIAGOTYRA , cilt.27, sa.4, ss.416-424, 2021 (SCI-Expanded, Scopus)

55. ANALYZING THE EFFECTS OF DIFFERENT TOOL PATHS ON FORM ERRORS IN THE MILLING OF FREEFORM SURFACES

BAHÇE E., Ozdemir B.

SIGMA JOURNAL OF ENGINEERING AND NATURAL SCIENCES-SIGMA MUHENDISLIK VE FEN BILIMLERI DERGISI , cilt.38, sa.3, ss.1321-1332, 2020 (ESCI)

56. Experimental Investigation of Delamination Formed by Bone Drilling

Koluacik S., Can M., BAHÇE E.

TEHNICKI VJESNIK-TECHNICAL GAZETTE , cilt.27, sa.3, ss.711-717, 2020 (SCI-Expanded, Scopus)

57. Analzing The Eeffects of Different Tool Paths on Form Errors in The Milling of Free Form Surfaces

BAHÇE E., ÖZDEMİR B.

SIGMA JOURNAL OF ENGINEERING AND NATURAL SCIENCES , cilt.38, sa.3, ss.1321-1332, 2020 (ESCI)

58. Production of abrasive apricot kernel shell powder/boron nitride/polyester composites for cleaning of paint and corrosion on metal surfaces

BAHÇE E., DEMİREL M. H., KÖYTEPE S., SEÇKİN T.

POLYMER COMPOSITES , cilt.41, sa.2, ss.544-555, 2020 (SCI-Expanded, Scopus)

59. Investigation of Surface Quality of CoCrMo Alloy Used in the Tibial Component of the Knee Prosthesis According to the Methods of Turning and Turning-Grinding

BAHÇE E., GÜLER M. S., Emir E.

MATERIALS SCIENCE-MEDZIAGOTYRA , cilt.26, sa.1, ss.41-48, 2020 (SCI-Expanded, Scopus)

60. KALÇA PROTEZLERİNDE OLUŞAN AŞINMANIN FEMUR KAS-İSKELET SİSTEMİ TABANLI SONLU ELEMANLAR ANALİZİ İLE İNCELENMESİ

BAHÇE E., KARAMAN D., GÜLER M. S.

Bilecik Şeyh Edebali Üniversitesi Fen Bilimleri Dergisi , cilt.6, sa.2, ss.268-277, 2019 (TRDizin)

61. Determination of tool deflection in drilling by image processing

BAHÇE E., Ozdemir B.

IET IMAGE PROCESSING , cilt.13, sa.13, ss.2487-2494, 2019 (SCI-Expanded, Scopus)

62. Investigation of the burr formation during the drilling of free-form surfaces in al 7075 alloy

Bahce E., Ozdemir B.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T , cilt.8, sa.5, ss.4198-4208, 2019 (SCI-Expanded, Scopus)

63. CoCrMo Alaşımı Üzerine TaN Esaslı İnce Film Kaplamaların Yüzey Özelliklerinin İncelenilmesi

BAHÇE E., ASLAN A. K., ÇAKIR N., GÜLER M. S.

Karadeniz Fen Bilimleri Dergisi , cilt.9, sa.2, ss.223-237, 2019 (Hakemli Dergi)

64. Investigation of wear of ultra high molecular weight polyethylene in a soft tissue behaviour knee joint prosthesis wear test simulator

BAHÇE E., Emir E.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T , cilt.8, sa.5, ss.4642-4650, 2019 (SCI-Expanded, Scopus)

65. Bağ Kesen Total Diz Protezinde Post Geometrisinin Konveks ve Konkav Durumunun Aşınmaya Etkisinin SEA ile Araştırılması

KOLUAÇIK S., MURAT C., BAHÇE E., EMİR E.

Ordu Üniversitesi Bilim ve Teknoloji Dergisi , cilt.9, sa.1, ss.45-57, 2019 (Hakemli Dergi)

66. Tribological investigation of multilayer CrN/CrCN/TaN films deposited by close field unbalanced magnettron sputtering

BAHÇE E., Cakir N.

REVIEWS ON ADVANCED MATERIALS SCIENCE , cilt.58, sa.1, ss.271-279, 2019 (SCI-Expanded, Scopus)

67. Influence of a stepped feed rate on burr formation when drilling Al-5005

BAHÇE E., ÖZEL C.

MATERIALS TESTING , cilt.60, sa.3, ss.316-324, 2018 (SCI-Expanded, Scopus)

68. Al2O3-Katkılı / Selüloz polyester Kompozitlerinin Hazırlanması ve Aşındırıcı Özelliklerinin İncelenmesi

BAHÇE E., KÖYTEPE S., DEMIREL M. H., SEÇKİN T.

TurkChem , cilt.7, sa.38, ss.44-52, 2015 (Hakemsiz Dergi)

69. Low Dielectric Constant Polyimide-Zirconium Nanocomposites with Improved Thermal Properties

SEÇKİN T., KÖYTEPE S., Kivilcim N., BAHÇE E., ADIGUZEL I.

INTERNATIONAL JOURNAL OF POLYMERIC MATERIALS , cilt.57, sa.5, ss.429-441, 2008 (SCI-Expanded, Scopus)

Hakemli Bilimsel Toplantılarda Yayımlanmış Bildiriler 9

1. TPMS Tabanlı Gyroid Kafeslerin Reçine Dolgulu Yapılarında Mekanik Dayanımın Değerlendirilmesi

AKBAY Ö. C., ÖZDEMİR B., BAHÇE E., GÜNDÜZ M. E.

2nd International Conference on Modern and Advanced Research ICMAR 2025, Konya, Türkiye, 16 - 17 Ocak 2025, cilt.2025, ss.66-71, (Tam Metin Bildiri)

2. Comparative Stress Analysis of One- And Two-Piece-Implants Under Occlusal Forces

BAKİ N., TUZLALI M., ARAL K., ARAL C. A., ŞİRİNER GÜMÜŞ H., BAHÇE E.

Turkish Society of Oral Implantology XXXIV. International Scientific Congress, İstanbul, Türkiye, 10 - 11 Ocak 2025, (Özet Bildiri)

3. Grafit/Al2O3 Takviyeli Alüminyum Metal Matris Kompozitlerin Frezelenmesinde Kesme Bölgesinde Meydana Gelen Sıcaklıkların İncelenmesi

ÖLMEZ C., BAHÇE E.

1st International Conference on Engineering and Applied Natural Sciences, Konya, Türkiye, 10 - 13 Mayıs 2022, (Tam Metin Bildiri)

4. EKLEMELİ İMALAT İLE ABS KULLANILARAK ÜRETİLMİŞ MODELLERDE ASETON BUHARI İLE TEMİZLEMENİN YÜZEY PARLATMAYA ETKİSİ

EMİR E., ÖZDEMİR B., BAHÇE E., AKBAY Ö. C.

4. Uluslararası Mühendislik Bilimleri ve Multidisipliner Yaklaşımlar Kongresi, İstanbul, Türkiye, 3 - 05 Kasım 2022, (Tam Metin Bildiri)

5. KAFES YAPILARINDA BOYUT DEĞİŞİMİNİN ÜRETİM HASSASİYETİNE ETKİSİNİN İNCELENMESİ

EMİR E., ÖZDEMİR B., BAHÇE E., ERENER G., UZUNYOL Ö. F.

4. Uluslararası Mühendislik Bilimleri ve Multidisipliner Yaklaşımlar Kongresi, İstanbul, Türkiye, 3 - 05 Kasım 2022, (Tam Metin Bildiri)

6. SEÇİCİ LAZER ERGİTME METODU İLE COCR ALAŞIMI KULLANILARAK ÜRETİLEN İSKELE YAPILARININ MEKANİK DAVRANIŞLARININ İNCELENMESİ

AKBAY Ö. C., BAHÇE E., ÖLMEZ C.

3rd INTERNATIONAL MODERN SCIENTIFIC RESEARCH CONGRESS, İstanbul, Türkiye, 06 Mayıs 2022, (Tam Metin Bildiri)

7. Comparative Biomechanical Evaluation of Combined Cement- and Screw-Retained Implant-Supported Restorations with 3D Finite Element Analysis

BAKİ N., TUZLALI M., BAHÇE E., GÜL AYGÜN E. B., ARISAN V., ÖZCAN M.

Meffert Implant Institute - Implant Masters Bone Symposium 2021 - Hard and Soft Tissue Grafting for Optimal Implant Reconstruction, Türkiye, 14 - 17 Ekim 2021, cilt.5, ss.1-3, (Özet Bildiri)

8. Investigation of Surface Qualities of CoCrMo Alloy Using Turning-Grinding Method

BAHÇE E., EMİR E., ASLAN A. K., KOCA T.

8.İnternational Advanced Technologies Symposium (IATS’17), Elazığ, Türkiye, 19 - 22 Ekim 2017, ss.1534-1539, (Tam Metin Bildiri)

9. Silindirik Parçaların Şekil ve Konum Toleranslarının Tespiti İçin Sistem Tasarımı

ŞAHİNASLAN A., BAHÇE E.

Makina İmalat Teknolojileri Kongresi-MATİT 2013, Bursa, Türkiye, 6 - 07 Aralık 2013, ss.244-252, (Tam Metin Bildiri)

Kitaplar 1

1. Experimental Investigation of the Effect of Machining Parameters on the Surface Roughness and the Formation of Built Up Edge (BUE) in the Drilling of Al 5005

BAHÇE E.

Tribology in Engineering, Dr. Hasim Pihtili, Editör, Intech, Rijeka, ss.15-28, 2013

Metrikler

Yayın

Yayın (WoS)

Yayın (Scopus)

Atıf (WoS)

H-İndeks (WoS)

Atıf (Scopus)

197

H-İndeks (Scopus)

Atıf (TrDizin)

H-İndeks (TrDizin)

Atıf (Diğer Toplam)

Toplam Atıf Sayısı

199

Yayınlar & Eserler

Yayın

Yayın (WoS)

Yayın (Scopus)

Atıf (WoS)

H-İndeks (WoS)

Atıf (Scopus)

H-İndeks (Scopus)

Atıf (TrDizin)

H-İndeks (TrDizin)

Atıf (Diğer Toplam)

Toplam Atıf Sayısı

Proje

Fikri Mülkiyet

Tez Danışmanlığı

Açık Erişim