Determination of Energy Consumption During The Tensile Test Sample Production in 3D Printer Working with The Fused Deposition Modeling Method
Iğdır Üniversitesi Fen Bilimleri Enstitüsü Dergisi, cilt.13, sa.3, ss.1998-2007, 2023 (TRDizin)
- Yayın Türü: Makale / Tam Makale
- Cilt numarası: 13 Sayı: 3
- Basım Tarihi: 2023
- Doi Numarası: 10.21597/jist.1198510
- Dergi Adı: Iğdır Üniversitesi Fen Bilimleri Enstitüsü Dergisi
- Derginin Tarandığı İndeksler: TR DİZİN (ULAKBİM)
- Sayfa Sayıları: ss.1998-2007
- Açık Arşiv Koleksiyonu: AVESİS Açık Erişim Koleksiyonu
- İnönü Üniversitesi Adresli: Evet
Özet
Today, 3-dimensional (3D) printers are developing increasingly, and rapid progress is being made to become an alternative to traditional production methods. 3D printers, which produce with the Fused Deposition Modeling (FDM) method, commonly produce by using polymer materials in the form of filament with a diameter of 1.75 mm or 2.85 mm. This study, tensile test specimens were produced using PLA filaments of different diameters (1.75 mm and 2.85 mm) with two different 3D printers. The electricity consumption of 3D printers during the production of tensile test samples was measured. The energy consumed by both 3D printers in producing tensile test specimens was compared. Instead of simultaneously producing a single test sample, it has been determined that the power consumption per test sample will be reduced by producing many test samples together.