Commagene Journal of Biology, cilt.6, sa.1, ss.1-5, 2022 (Hakemli Dergi)
Bakteriyel selüloz farklı alanlarda kullanılmaktadır. Bu alanlardan biri, bu malzemeyi farklı boyaların renklerinin giderimi
için biyoadsorban olarak kullanmaktır. Çalışmada, bakteriyel selüloz (BS) elde etmek için Gluconacetobacter xylinus
kullanılmıştır. BS'nin yaş ve kuru formları, Reaktif Mavi 171 (CI Chrocion Mavi HERD) (200 mg/L), Remazol Parlak Mavi
R'nin (150 mg/L) (C. I Reaktif Mavi 19) ve Chrocion Yeşil H-E4BD (100 mg/L) boyalarının uzaklaştırılması için biyoadsorban
olarak kullanıldı. En yüksek renk giderme oranları, ilk kullanımda yaş BS ile 30°C, 150 rpm'de 24 saat inkübasyondan sonra
CBHERD, RBBR ve CH Yeşil boyaları için sırasıyla %51, %52 ve %54 olarak elde edilmiştir. Bu değerler ilk kullanım sonunda
BS’nin kuru formları için %11, %21 ve %20 idi. Aynı zamanda bakteriyel selülozun yapısı ve morfolojisi SEM, XRD ve FTIR
analizleri ile belirlendi.
Bacterial cellulose is used in different areas. One of these areas is using this material as bioadsorbent for
decolorization of different dyes. In the study, Gluconacetobacter xylinus was used for obtaining bacterial cellulose (BC). The wet
and dry forms of the BC were utilized as bioadsorbent for removal of the Reactive Blue 171 (C.I Chrocion Blue HERD) (200
mg/L), Remazol Brilliant Blue R (150 mg/L) (C. I Reactive Blue 19), and Chrocion Green H-E4BD (100 mg/L) dyes. The highest
decolorization rates were obtained with wet BC at the first use as 51%, 52% and 54% for CBHERD, RBBR, and CH GREEN
dyes after 24 hours of incubation at 30°C, 150 rpm, respectively. These values were 11%, 21%, and 20% for dry forms of BC at
the end of the first use. At the same time, the structure and morphology of bacterial cellulose were determined by SEM, XRD,
and FTIR analysis.