Effect of tensile stress on magnetoimpedance properties of CoNiFe/Cu wire


BAYRİ N., KOLAT V. S., KAYA H., ATALAY F., İZGİ T., ATALAY S.

JOURNAL OF PHYSICS D-APPLIED PHYSICS, cilt.42, sa.17, 2009 (SCI-Expanded) identifier identifier

Özet

A Co20.5Ni40.5Fe39 magnetic film was electrodeposited onto a copper wire 50 mu m in diameter. The magnetoimpedance (MI) effect, (Delta Z/Z)(H)(%) = ((Z(H)-Z(max))/Z(max)) x 100, was measured in the Co20.5Ni40.5Fe39/Cu composite wire under varying tensile stresses up to 30 MPa. The results showed that large MI and stress impedance (SI) effects can be observed in the Co20.5Ni40.5Fe39/Cu composite wire. The MI curve at zero tensile stress shows a small split peak in the low-field region. With increasing applied tensile stress, single-peak behaviour of the MI effect is observed. The magnitude of the MI and SI effects decreases with increasing tensile stress, sigma. The peak values of (Delta Z/Z)(H)(%) for the sample decrease from 265% at sigma = 0 to 39% at sigma = 30MPa at 40 kHz ac driving-current frequency. The impedance of a sample under the effect of 25 MPa tensile stress at 40 kHz ac driving-current frequency showed variations of about 146%. It was also found that the frequency value, f*, where the maximum MI effect was observed as a function of driving-current frequency, increases with increasing tensile stress.