Magnetoimpedance effects in a CoNiFe nanowire array

ATALAY S., KAYA H., ATALAY F., AYDOGMUS E.

JOURNAL OF ALLOYS AND COMPOUNDS, cilt.561, ss.71-75, 2013 (SCI-Expanded) identifier identifier

  • Yayın Türü: Makale / Tam Makale
  • Cilt numarası: 561
  • Basım Tarihi: 2013
  • Doi Numarası: 10.1016/j.jallcom.2013.01.173
  • Dergi Adı: JOURNAL OF ALLOYS AND COMPOUNDS
  • Derginin Tarandığı İndeksler: Science Citation Index Expanded (SCI-EXPANDED), Scopus
  • Sayfa Sayıları: ss.71-75
  • Anahtar Kelimeler: Magnetoimpedance, Nanowire, GIANT MAGNETO-IMPEDANCE, MAGNETORESISTANCE CONTRIBUTION, SIMPLE-MODEL, THIN-FILMS, SENSOR, MICROWIRES, ANISOTROPY, SINGLE, WIRES
  • İnönü Üniversitesi Adresli: Evet

Özet

This report describes the growth of CoNiFe nanowires into highly ordered porous anodic alumina oxide (AAO) templates by DC electrodeposition at a pH value of 2.6. Scanning electron microscopy (SEM) observations revealed that the wires have diameters of approximately 270-290 nm and a length of 25 mu m. The energy dispersive X-ray (EDX) analysis indicated that the composition of the nanowires is Co12Ni64Fe24. Electrical contacts were created on both sides of the nanowire array, and their magnetoimpedance (MI) properties were investigated. The impedance value was initially 1.2 ohm at low frequency and increased to approximately 1000 ohm for a 33-MHz driving current frequency under no applied magnetic field. All the MI curves exhibited single peak behaviour due to the high shape anisotropy. The maximum MI change at the 33-MHz driving current frequency was 2.72%. The maximum resistance change was 5.4% at 33 MHz. (C) 2013 Elsevier B. V. All rights reserved.