Publications & Works

Publication Network
Articles 20
All (20)
SCI-E, SSCI, AHCI (13)
SCI-E, SSCI, AHCI, ESCI (13)
Scopus (13)
TRDizin (6)
Other Publications (1)

1. Experimental and numerical investigation of axial crushing behavior of hybrid sandwich pipes

Kaman M. O., Erdem S., ALBAYRAK M., Gur M., Asan A. M., Eroglu M., et al.
Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications , 2026 (SCI-Expanded, Scopus) identifier

2. Patch effect on the bending behavior of double-cracked hat-shaped carbon fiber composite beams

Albayrak M., Ballıkaya H., Kaman M. O.
Materialpruefung/Materials Testing , 2026 (SCI-Expanded, Scopus) identifier

3. Impact performance of hat-stiffened composite panels reinforced with I-beam

Uslu M., Kaman M. O., Yanen C., ALBAYRAK M., DAĞ S., Erdem S., et al.
Materialpruefung/Materials Testing , 2026 (SCI-Expanded, Scopus) identifier

4. Comparation of failure criterions for pin loaded composite plates under fatigue loads

Albayrak M., Kaman M. O., Orcen G., Albayrak M., Erdem S.
JOURNAL OF COMPOSITE MATERIALS , vol.0, no.0, pp.1-24, 2025 (SCI-Expanded, Scopus)

5. Fracture behavior of cracked composite plates repaired with a patch under various loading conditions

Durmus H., Kaman M. O., Yanen C., ALBAYRAK M.
Sadhana - Academy Proceedings in Engineering Sciences , vol.50, no.1, 2025 (SCI-Expanded, Scopus) identifier

6. INVESTIGATION OF FLEXURAL BEHAVIOR OF CARBON FIBER BEAMS

Albayrak M.
International Journal of Innovative Engineering Applications , vol.8, no.1, pp.53-57, 2024 (TRDizin) identifier

7. Numerical Investigation of the Effect of Deltoid Radius on Tensile Load in T-joints

albayrak m.
Firat University journal of experimental and computational engineering (Online) , vol.3, no.2, pp.216-226, 2024 (TRDizin) Creative Commons License identifier

8. Experimental and numerical impact behavior of fully carbon fiber sandwiches for different core types

Albayrak M., Kaman M. O., Albayrak M.
JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING , vol.46, no.5, pp.318-339, 2024 (SCI-Expanded, Scopus) identifier

9. Experimental and numerical investigation of patch effect on the bending behavior for hat-shaped carbon fiber composite beams

Albayrak M.
MATERIALPRUEFUNG/MATERIALS TESTING , vol.66, no.4, pp.584-597, 2024 (SCI-Expanded, Scopus) identifier

10. Comparison of Hashin and Puck criterions for failure behavior of pin loaded composite plates

Albayrak M., Kaman M. O., Erdem S., Albayrak M.
MATERIALWISSENSCHAFT UND WERKSTOFFTECHNIK , vol.55, no.3, pp.314-329, 2024 (SCI-Expanded, Scopus) identifier

11. Design and production of new type reinforced U-profile composite panels

USLU M., KAMAN M. O., YANEN C., ALBAYRAK M., DAĞ S., ERDEM S., et al.
Journal of Engineering and Basic Sciences , vol.2, no.4, pp.28-34, 2024 (Peer-Reviewed Journal)

12. Low-velocity impact behaviours of sandwiches manufactured from fully carbon fiber composite for different cell types and compression behaviours for different core types

Bozkurt I., Kaman M. O., Albayrak M.
MATERIALPRUEFUNG/MATERIALS TESTING , vol.65, no.9, pp.1349-1372, 2023 (SCI-Expanded, Scopus) identifier

13. Investigation of the mechanical response of laminated composites reinforced with different type wire mesh

Alev K. I., Kaman M. O., Albayrak M., Yanen C.
JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING , vol.45, no.9, pp.475, 2023 (SCI-Expanded, Scopus) Creative Commons License identifier

14. The effect of lamina configuration on low-velocity impact behaviour for glass fiber/rubber curved composites

Albayrak M., Kaman M. O., Bozkurt I.
JOURNAL OF COMPOSITE MATERIALS , vol.57, no.11, pp.1875-1908, 2023 (SCI-Expanded, Scopus) Creative Commons License identifier

15. Effect of nonlinear material behavior on progressive failure analysis of pin-joint composites

Cayir S., Kaman M. O., Albayrak M.
MECHANICS BASED DESIGN OF STRUCTURES AND MACHINES , vol.45, no.9, pp.120-123, 2023 (SCI-Expanded, Scopus) identifier

16. Experimental and Numerical Investigation of the Geometrical Effect on Low Velocity Impact Behavior for Curved Composites with a Rubber Interlayer

Albayrak M., Kaman M. O., Bozkurt İ.
APPLIED COMPOSITE MATERIALS , vol.30, no.2, pp.1-2, 2023 (SCI-Expanded, Scopus) identifier

17. Experimental and numerical determination of interlayer shear strength of glass fiber-reinforced epoxy composites

ALBAYRAK M., AŞAN A. M., KAMAN M. O., BOZKURT İ.
Journal of Structural Engineering & Applied Mechanics (Online) , vol.5, no.4, pp.289-299, 2022 (TRDizin) identifier

18. Effect of repair parameters on composite plates under low velocity impact

ALBAYRAK M., GÜR M., KAMAN M. O.
European Mechanical Science , vol.6, pp.58-67, 2022 (TRDizin) identifier

19. Production of Curved Surface Composites Reinforced with Rubber Layer

ALBAYRAK M., KAMAN M. O.
European Journal of Technique , vol.11, no.1, pp.19-22, 2021 (TRDizin)

20. Charpy darbe testinin deneysel ve sayısal analizi

ALBAYRAK M., KAMAN M. O.
Dicle Üniversitesi Mühendislik Fakültesi Mühendislik Dergisi , vol.10, no.3, pp.945-957, 2019 (TRDizin)
Papers Presented at Peer-Reviewed Scientific Conferences 11

1. I-PROFİLE SAHİP KOMPOZİTLERİN BUKULMA YÜKÜ ALTINDAKİ MEKANİK DAVRANIŞININ SAYILSAL OLARAK İNCELENMESİ.

ALBAYRAK M.
ANKARA INTERNATIONAL CONGRESS ON SCIENTIFIC RESEARCH-X, Ankara, Turkey, 25 - 27 June 2024, pp.897-904, (Full Text)

2. KAUÇUK HÜCRE TİPİ USTURMAÇALARIN BASMA YÜKÜ ALTINDAKİ MEKANİK DAVRANIŞININ SAYISAL OLARAK İNCELENMESİ

ALBAYRAK M.
7TH INTERNATIONAL AZERBAIJAN CONGRESS ON LIFE, ENGINEERING, MATHEMATICAL, AND APPLIED SCIENCES, Baku, Azerbaijan, 25 - 27 June 2024, (Full Text)

3. Meso-Mechanic Analysis of Laminated Composites Reinforced with Aluminum Mesh

İŞGÖR ALEV K., KAMAN M. O., YANEN C., ALBAYRAK M.
INTERNATIONAL CONFERENCE ON ADVANCES AND INNOVATIONS IN ENGINEERING, Malatya, Turkey, 21 - 23 September 2023, pp.420-425, (Full Text)

4. 100Cr6 ÇELİĞİNİN TEĞETSEL SİLİNDİRİK TAŞLAMA YÖNTEMİ İLE İŞLENMESİNDE YÜZEY PÜRÜZLÜĞÜNÜN ARAŞTIRILMASI

BALLIKAYA H., ALBAYRAK M.
2. ULUSLARARASI MALZEME MÜHENDİSLİĞİ VE İLERİ İMALAT TEKNOLOJİLERİ KONGRESİ (IMEAMTC’23), İstanbul, Turkey, 12 - 13 January 2023, pp.47-53, (Full Text)

5. Numerical Investigation of the Behavior of Sandwich Structures Consisting Fully Carbon Fiber Composite with Triangular Cell Structure Under Different Impact Energies

BOZKURT İ., KAMAN M. O., ALBAYRAK M.
11th International Fibers and Polymers Research Symposium, Kocaeli, Turkey, 4 - 05 November 2022, (Full Text)

6. Effect of Lamina Thickness on Low Velocity Impact Behavior for Glass Fiber Curved Composites

ALBAYRAK M., KAMAN M. O., BOZKURT İ.
11th International Fibers and Polymers Research Symposium, Kocaeli, Turkey, 4 - 05 November 2022, (Full Text)

7. LS-DYNA MAT162 Finding Material Inputs and Investigation of Impact Damage in Carbon Composite Plates. In Conference Proceedings, Paris France February

ALBAYRAK M., KAMAN M. O., BOZKURT İ.
Mechanics of Fatigue and Fracture, February 17-18, 2022 - France, Paris, Paris, France, 17 February 2022, vol.17, pp.44-46, (Full Text)

8. Determination of LS-DYNA MAT162 Material Input Parameters for Low Velocity Impact Analysis of Layered Composites

ALBAYRAK M., KAMAN M. O., BOZKURT İ.
International Conference on Mechanics of Fatigue and Fracture February 17-18, 2022 in Paris, France, Paris, France, 17 February 2022, vol.17, pp.39-43, (Full Text)

9. PRODUCTION OF CURVED SURFACE COMPOSITES REINFORCED WITH RUBBER LAYER

ALBAYRAK M., KAMAN M. O.
International Engineering and Natural Sciences Conference (IENSC 2020) 5-6 November 2020, Dicle University, Diyarbakır, Turkey, Diyarbakır, Turkey, 5 - 06 November 2020, (Full Text)

10. LOW VELOCITY IMPACT BEHAVIOR OF ALUMINUM SANDWICH PLATES HAVING RUBBER CORE

ALBAYRAK M., KAMAN M. O.
4nd International Conference on Material Science and Technology in Kızılcahamam (IMSTEC’19), October 18-20, 2019, Ankara/TURKEY, Ankara, Turkey, 18 - 20 October 2019, (Full Text)

11. NUMERICAL ANALYSIS OF HYPER ELASTIC RUBBER PLATES UNDER LOW VELOCITY IMPACT LOADING

ALBAYRAK M., KAMAN M. O.
Internatinonal Conference on Materials Science Mechanical and Automation Engineerings and Technology, 21 - 23 June 2019, (Full Text)